import ScreenshotNumberReference from '/src/components/ScreenshotNumberReference.jsx';

Content Manager#

The Content Manager is Strapi’s interface for browsing and editing entries. This documentation gives an overview of the Content Manager and explains the views and how to write content in fields, components, dynamic zones and relational fields.

From the Content Manager, accessible via the main navigation of the admin panel, users can write and manage their content.

Minimum "Configure view" permissions in Roles > Plugins - Content Manager. Available in both Development & Production environment.

Overview#

The Content Manager contains the available collection and single content-types which were created beforehand using the Content-type Builder.

Content can be created, managed and published from the 2 categories displayed in the sub navigation of the Content Manager:

Collection types, which lists available content-types managing several entries. For each available collection type, multiple entries can be created, which is why each collection type is divided into 2 interfaces:
- the list view, which displays a table with all entries created for that collection type.
- the edit view, which focuses on a chosen entry of your collection type, and from where you can actually manage the content.
Single types, which lists available content-types with only one entry. Unlike collection types, which have multiple entries, single types are not created for multiple uses. In other words, there can only be one default entry per available single type. There is therefore no list view in the Single types category.

When Draft & Publish is enabled for the content type, the Filters menu includes a Status field. You can filter entries by:

Draft (never published) (entries that have never been published),
Published (all) (all published entries),
Published (modified) (published entries with draft changes not yet published),
or Published (unmodified) (published entries with no draft changes).

Configuration#

Both the list view and the edit view can be configured.

Configuring the list view {#list-view-settings}#

The list view table can be configured in 2 ways: with a quick configuration directly from the list view, or with a permanent and advanced configuration for more options. Both configurations persist and are specific to each content type.

Quick configuration#

The list view can be configured on the fly to choose which fields to display in the table. These display preferences are saved in the browser and persist across page refreshes and navigation.

Click on the settings button .
Tick the boxes associated with the field you want to be displayed in the table.
Untick the boxes associated with the fields you do not want to be displayed in the table.

Permanent & advanced configuration#

For more advanced list view options (e.g., enablement/disablement of search, filters and bulk actions, reordering of the list view table's fields etc.), use the full configuration interface.

In the list view of your collection type, click on the settings button then Configure the view to be redirected to the list view configuration interface.
In the Settings area, define your chosen new settings:

Setting name	Instructions
Enable search	Click on TRUE or FALSE to able or disable the search.
Enable filters	Click on TRUE or FALSE to able or disable filters.
Enable bulk actions	Click on TRUE or FALSE to able or disable the multiple selection boxes in the list view table.
Entries per page	Choose among the drop-down list the number of entries per page.
Default sort attribute	Choose the sorting field that will be used by default.
Default sort order	Choose the sorting type that will be applied by default.

Click on the Save button.

In the list view of your collection type, click on the settings button then Configure the view to be redirected to the list view configuration interface.
In the View area, define what fields to display in the list view table, and in what order:
- Click the add button to add a new field.
- Click the delete button to remove a field.
- Click the reorder button and drag and drop it to the place you want it to be displayed among the other fields.
Click the edit button to access its available own settings:

Setting name	Instructions
Label	Write the label to be used for the field in the list view table.
Enable sort on this field	Click on TRUE or FALSE to able or disable the sort on the field.

Click on the Save button.

Configuring the edit view {#edit-view-settings}#

In the edit view of your content-type, click on the button then Configure the view.
In the Settings area, define your chosen new settings:

Setting name	Instructions
Entry title	Choose among the drop-down list the field that should be used as title for the entry.
Relation open behavior	Choose how relation entries open when clicked. Modal (default) opens the entry in an overlay modal. Navigate to page navigates to the entry's full edit page. Open in new tab opens it in a new browser tab.

Click on the Save button.

In the edit view of your content-type, click on the button then Configure the view.
In the View area, define what fields (including relational fields) to display in the list view table, in what order and what size:
- Click the Insert another field button to add a new field.
- Click the delete button to remove a field.
- Click the reorder button and drag and drop it to the place you want it to be displayed among the other fields.
Click the edit button of a field to access its available settings:

Setting name	Instructions
Label	Write the label that should be used for the field.
Description	Write a description for the field, to help other administrators fill it properly.
Placeholder	Write the placeholder that should be displayed by default in the field.
Editable field	Click on TRUE or FALSE to able or disable the edition of the field by administrators.
Size	Select the size in which the field should be displayed in the Content Manager. Note that this setting is neither available for JSON and Rich Text fields, nor dynamic zones and components.
Entry title	(relational fields only) Write the entry title that should be used for the relational field. It is recommended to choose well the entry title of relational fields as the more comprehensive it is, the easier it will be for administrators to manage the content of relational fields from the edit view.

Click on the Save button.

The settings and display of a component's fields cannot be managed and reordered through the entry's edit view configuration page. Click on the Set the component's layout button of a component to access the component's own configuration page. You will find the exact same settings and display options as for the entry, but that will specifically apply to your component.

Note also that the settings are defined for the component itself, which means that the settings will automatically be applied for every other content-type where the component is used.

Usage#

Creating & Writing content#

In Strapi, writing content consists in filling up fields, which are meant to contain specific content (e.g. text, numbers, media, etc.). These fields were configured for the collection or single type beforehand, through the Content-type Builder.

To write or edit content:

In the Content Manager:
- Either click on the Create new entry button in the top right corner of the collection type of your choice to create a new entry,
- Or access the edit view of your already created collection type's entry or single type.
Write your content, following the available field schema. You can refer to the table below for more information and instructions on how to fill up each field type.

Field name	Instructions
Text	Write your content in the textbox.
Rich text (Markdown)	Write your textual content in the editor, in Markdown. Some basic formatting options (titles, bold, italics, underline) are available in the top bar of the editor to apply to selected text. A Preview mode/Markdown mode button to switch between modes is also available. 💡 The box can be expanded by clicking on Expand in the bottom bar. It displays side by side, at the same time, the textbox that you can edit and the preview.
Rich text (Blocks)	Write and manage your content in the editor, which automatically renders live all additions/updates. In the Blocks editor, paragraphs behave as blocks of text: hovering on a paragraph will display an icon on which to click to reorder the content. Options to format or enrich the content are also accessible from the top bar of the editor (basic formatting options, code, links, image etc.). 💡 You can use text formatting keyboard shortcuts in the Blocks editor (e.g. bold, italics, underline, and pasting link).
Number	Write your number in the textbox. Up and down arrows, displayed on the right of the box, allow to increase or decrease the current number indicated in the textbox.
Date	1. Click the date and/or time box. 2. Type the date and time or choose a date using the calendar and/or a time from the list. The calendar view fully supports keyboard-based navigation.
Media	1. Click the media area. 2. Choose an asset from the Media Library or from a folder if you created some, or click the Add more assets button to add a new file to the Media Library. 💡 It is possible to drag and drop the chosen file in the media area.
Relation	Choose an entry from the drop-down list. See relational fields for more information.
Boolean	Click on TRUE or FALSE.
JSON	Write your content, in JSON format, in the code textbox.
Email	Write a complete and valid email address.
Password	Write a password. 💡 Click the icon, displayed on the right of the box, to show the password.
Enumeration	1. Click the drop-down list. 2. Choose an entry from the list.
UID	Write a unique identifier in the textbox. A "Regenerate" button, displayed on the right of the box, allows automatically generating a UID based on the content type name.

Components#

Components are a combination of several fields, which are grouped together in the edit view. Writing their content works exactly like for independent fields, but there are some specificities to components.

There are 2 types of components: non-repeatable and repeatable components.

Non-repeatable components are a combination of fields that can be used only once.

By default, the combination of fields is not directly displayed in the edit view:

Click on the add button to add the component.
Fill in the fields of the component.

To delete the non-repeatable component, click on the delete button , located in the top right corner of the component area.

Repeatable components are also a combination of fields, but they allow the creation of multiple component entries, all following the same combination of fields.

To add a new entry and display its combination of fields:

Click on the add button to add the component.
Fill in the fields of the component.
(optional) Click on the Add an entry button and fill in the fields again.

The repeatable component entries can be reordered or deleted directly in the edit view, using buttons displayed on the right of the entry area.

Use the drag & drop button to reorder entries of your repeatable component.
Use the delete button to delete an entry from your repeatable component.

Dynamic zones#

Dynamic zones are a combination of components, which themselves are composed of several fields. Writing the content of a dynamic zone requires additional steps in order to access the fields.

Click on the Add a component to [dynamic zone name] button.
Choose a component available for the dynamic zone.
Fill in the fields of the component.

Dynamic zones' components can also be reordered or deleted directly in the edit view, using buttons displayed in the top right corner of the component area.

Use the drag & drop button to reorder components in your dynamic zone.
Use the delete button to delete a component from your dynamic zone.

Relational fields#

Relation-type fields added to a content-type allow establishing a relation with another collection type. These fields are called "relational fields".

The content of relational fields is written from the edit view of the content-type they belong to. However, relational fields can point to one or several entries of the other collection type, this is why in the Content Manager it is possible to manage a content-type's relational fields to choose which entries are relevant.

Example of relational fields

In my Strapi admin panel I have created 2 collection types:

Restaurant, where each entry is a restaurant
Category, where each entry is a type of restaurant

I want to assign a category to each of my restaurants, therefore I have established a relation between my 2 collection types: restaurants can have one category.

In the Content Manager, from the edit view of my Restaurant entries, I can manage the Category relational field, and choose which entry of Category is relevant for my restaurant.

Many-to-one, one-to-one, and one-way types of relation only allow to choose one entry per relational field.

To select the only relevant relational field's entry:

In the content-type's edit view, click on the drop-down list of the relational field.
Among the list of entries, choose one.

To remove the entry selected in the drop-down list, click on the delete button .

Many-to-many, one-to-many, and many-ways types of relation allow to choose several entries per relational field.

To select the relevant relational field's entries:

In the content-type's edit view, click on the drop-down list of the relational field.
Among the list of entries, choose one.
Repeat step 2 until all relevant entries have been chosen.

To remove an entry, click on the cross button in the selected entries list.

Entries from multiple-choice relational fields can be reordered, indicated by a drag button . To move an entry, click and hold it, drag it to the desired position, then release it.

Deleting content#

You can delete content by deleting any entry of a collection type, or the default entry of a single type.

In the edit view of the entry, click on at the top right of the interface, and click the Delete document button.
If Internationalization is enabled for the content-type, you can also choose to delete only the currently selected locale by clicking on the Delete locale button.
In the window that pops up, click on the Confirm button to confirm the deletion.